Signal terminals offer a reliable and direct connection to the PCB, combining flexibility, robustness, and efficiency for industrial electronics. The modern PUSH IN spring-loaded connection enables simple, tool-free wiring for a wide range of applications.
These universally applicable terminals are available in pitches from 3.50 mm to 7.62 mm, ensuring high compatibility with a wide range of PCB layouts. Thanks to reflow-compatible variants as well as THT- and SMD-compatible versions, the components can be flexibly integrated into a wide variety of manufacturing processes. Multi-tiered designs also enable a particularly compact device architecture – without compromising on accessibility or reliability.
Robust contact technologies and intelligent clamping mechanisms ensure consistently reliable connections, even under conditions of vibration, temperature fluctuations or frequent handling. This makes the signal terminals ideal for use in control cabinets, I/O modules and in measurement, monitoring and automation applications.
Thanks to their combination of flexibility, performance and ease of installation, Weidmüller signal terminals simplify the design-in process, reduce installation time and support efficient solutions for industrial electronics.
The innovative quick connector – simple, safe and economical. Thanks to its compact dimensions and high performance rating of 17.5 A / 800 V (IEC), the LSF-SMT meets the demands of the miniaturisation market. OMNIMATE® Signal PCB terminals LSF-SMT offer a wide pitch range from 3.50 mm to 7.62 mm and various conductor outlet directions (90°/135°/180°) to the PCB for conductor cross-sections up to 1.5 mm². The use of high-quality materials ensures maximum cost efficiency in the manufacturing of electronic assemblies.
Solid wires or wires with ferrules can plugged directly thanks to the times-saving PUSH IN connection technology. The contact can be opened easily by pressing the push button.
Thanks to the pick-and-place pad, automated assembly in the SMT process is possible.
The tape on reel packaging in standard tape widths supports an efficient automatic assembly process. The optimised Pick and Place pads ensure that the pick and place process is safe and reliable.
Thanks to the 90°, 135° and 180° conductor output orientations across all module sizes from 3.50 to 7,62 mm, a wide range of design options is possible.
The LSF-SMD meets the requirements for fully automated PCB assembly as an SMD component. Two SMD solder pads per pole ensure high mechanical stability in accordance with IPC-A-610 Class 2. This enables applications on PCBs made of glass, ceramic, and aluminium composite materials to also benefit from PUSH IN technology. Weidmüller’s existing range of reflow-compatible LSF SMT terminals with THR soldering has been expanded to include a true SMD variant. The various module sizes ranging from 3,50 mm to 7,62 mm and the conductor exit angles of 90°, 135° and 180° allow for high package density with a maximum wire cross-section of 1,5 mm².
Tool-free, secure connection of conductors up to 1,5 mm² thanks to proven PUSH IN technology. The integrated actuator enables fast and convenient disconnection of the connection.
The LCP material does not cause blistering and does not need pre-drying (MSL 1). Direct placement using the SMT process is possible.
The strap packaging in standard widths enables an efficient, automated assembly process. The optimised pick-and-place pads guarantee a safe and reliable pick-and-place process.
Thanks to two solder pins per terminal, the LSF-SMD PCB connection is securely attached to the PCB and does not require an additional mounting flange.
Innovative developments in the industrial device landscape require precisely tailored connection solutions for power supply. Your best bet is our new, compact LMF PCB terminals featiromg modern connectivity technology. The demands of industrial devices are for a supply voltage of 250 V on a PCB terminal including reliable contact to the connection wire and very safe electrical insulation materials. Our response is the LMF with time-saving PUSH IN connectivity technology, an integrated test point, and a 90° and 180° direction of wire outlet for flexible application. The Wemid insulating material enables the use of the PCB terminal at a continuous operating temperature of up to 120°C. With these functional properties, the LMF meets the high design requirements of industrial device connections.
Benefit from the highly secure, current-carrying capacity and mechanical stability on the PCB board, without additional mounting elements.
Solid wires or wires with ferrules can plugged directly thanks to the times-saving PUSH IN connection technology. The contact can be opened easily by pressing the push button.
The highly flexible design offers you contact options from above (180°) or the side (90°). The optional pusher enables fast and secure wiring.
You can carry out the necessary service work in a safe, user-friendly manner if you have easy access to the potential
Thanks to the PUSH IN connection system, OMNIMATE® Signal LMFV PCB terminals enable particularly quick and secure device connection. Its layout is consistent with the tried-and-tested LM product family featuring clamp-on terminals. This gives device developers the choice of selecting the traditional clamp-on connection or the innovative PUSH IN connection. LMFV PCB terminals are optimised for wave soldering processes.
Solid wires or wires with ferrules can plugged directly thanks to the times-saving PUSH IN connection technology. The contact can be opened easily by pressing the push button.
Flexible selection of the connection technology makes it possible to achieve particularly precise solutions. The layout and design compatibility with the OMNIMATE® LM PCB terminal with screw connection enables flexible use.
A range of colour options allows you to customise the PCB terminals and achieve the best possible design for your equipment.
Compact dimensions through miniaturisation while maintaining high functionality: these are the key challenges in the development of monitoring and I/O systems and devices in building automation. The double-row OMNIMATE® Signal PCB terminal LS2HF meets both requirements thanks to its space-saving design and, in particular, through the time-saving PUSH IN connection system. Optimised for wire cross-sections up to 1,5 mm² with a pitch of 3,5 mm. The LS2HF features a built-in slider to open the contact with ease. An additional measurement point makes it easy to perform any necessary service checks. The LS2HF’s 90° cable entry and compact, two-row design allow for easy integration into the front panel of equipment.
Benefit from the highly secure, current-carrying capacity and mechanical stability on the PCB board, without additional mounting elements.
Necessary maintenance work and measurements can be performed safely, reliably and conveniently
The PUSH IN contact can be easily opened by pressing the push-button quickly and firmly.
The compact design, featuring a PUSH IN connection system across two levels, is ideal for wire cross-sections of up to 1,5 mm² with a pitch of 3,50 mm
OMNIMATE® Signal PCB terminals are used in industrial electronics wherever signals need to be connected reliably, compactly, and with long-term security on the PCB.
A heat pump is a device that transfers thermal energy from a cooler place to a warmer one. It uses the temperature difference in the environment to absorb and transfer heat. The system operates in a continuous cycle of evaporation, compression, condensation and expansion, thereby efficiently transferring heat. Compared to conventional heating systems, a heat pump requires less primary energy, as most of the heat is drawn from the environment. It therefore represents an energy efficient and environmentally friendly solution for heating or cooling buildings.
An HVAC system regulates temperature, air quality, and humidity to create a comfortable indoor environment. It combines heating, cooling, and ventilation and is used in residential, commercial, and industrial buildings. The installation is typically located outside the building or on the roof. The system architecture includes a power supply, a controller board for central processing, as well as a control unit for sensors and actuators that captures measurement data and manages control processes. Integrated communication interfaces enable data exchange with higher‑level building management systems. The system is typically installed outside the building or on the roof.
As experienced experts, we support our customers and partners around the world with products, solutions and services in the industrial environment of power, signals and data. One the one hand, it allows us to produce controllers that are increasingly sophisticated. We are therefore continuously developing innovative, sustainable and value-adding solutions for their individual needs. You also have to consider industry-wide standards and of course keep automation expertise at the highest level too.
Stricter requirements in building safety are becoming increasingly important and thus necessitate the use of future-proof monitoring systems. Besides fulfilling legal regulations and standards, such as DIN VDE 0833, it must be ensured that the equipment reliably protects people and property.
They are ideal for applications in process and manufacturing automation, as well as in measurement and control technology, where signals need to be connected to the PCB reliably and in a space-saving manner.
The range includes various connection methods, from traditional screw connections and clamp-on technology to tool-free PUSH IN spring-loaded connections.
PUSH IN technology enables quick, convenient and reliable wiring of PCBs. Rigid conductors or flexible conductors fitted with wire-end ferules can be inserted directly tool-free – this significantly reduces the time and effort required for installation.
The integrated spring mechanism ensures consistently high contact security, vibration resistant connections and long-lasting stability. Compact designs and reduced pitch dimensions also help to save valuable PCB space.
The intuitive operation minimises wiring errors and makes both initial installation and maintenance work easier.
OMNIMATE® Signal PCB terminals cover all relevant cross-section ranges up to 6 mm².
Yes. A wide range of reflow-compatible SMT and THR products supports fully automated manufacturing processes. THT variants are ideal for manual assembly or wave solder. OMNIMATE® thus offers maximum flexibility for a variety of soldering processes.
Quick, tool-free wiring after assembly
Reliable spring-loaded contacts even after reflow or THR soldering processes
Compact designs for high connection densities
The PCB terminals are available in all standard pitch sizes from 3,50 mm to 7,62 mm, as well as in compact, multi-tier designs with a number of poles up to 72.
Multi-level designs allow for a high connection density on the PCB and save valuable space inside the equipment.
Yes, the contact technologies used guarantee reliable connections over the long term, even under industrial conditions such as vibrations or temperature fluctuations.
The products comply with current international standards and approvals and can be used in industrial applications worldwide.
Yes, depending on the product family, customised variants—for example, in terms of the number of poles, coding or marking—can be produced.
Weidmüller supports device developers with technical advice, digital engineering tools and samples to help them find the ideal PCB connection solution.
With our OMNIMATE® Services, we can help you and your business achieve the highest possible levels of efficiency. You can reduce your product costs and benefit from our support across all phases of your project. Save valuable time with an application- or product-oriented search via our ConnectorGuide, and benefit from fast selection thanks to our web configurator.
Feel free to contact our experts for more information on our PCB connectors or if anything is unclear. Simply use the services of our support center. We’ll help you identify the ideal solution for your needs. Are you unsure about how to properly mount our PCB connectors and PCB terminals? If so, as well as contacting our customer support team, you can also watch one of our handling videos . You can find these in our online product catalogue or by scanning the QR code on the product itself.
We provide you with information on our OMNIMATE® components for signal connection for download. Download our quick reference guide or product catalogue to find exactly the PCB signal connectors and terminals you need.
Whether you come to us as a device developer, product manager or buyer, we promise you efficiency, speed and tailored solutions. Weidmüller is your perfect partner for PCB connectors and PCB terminals. You can rely on our expertise and know-how. Working with you, we’ll find the products that meet your requirements.
